BGP

news

What Makes a Quality MTP/MPO Cable

MTP/MPO cables are used in a variety of high-speed, high-density applications and within larger data centers. Generally the quality of the cable is determined by the stability and sustainability of the network as a whole. So, how can you spot a quality MTP Cable in the wild?

112 (1)

Below are 5 things you should look for in MTP cables to ensure you get the quality you are looking for.

1. Branded Fiber Cores

MTP/MPO solutions are usually employed in networks where space is at a premium such as telecommunications distribution boxes and data center cabinets. When this happens it usuaslly results in small bend angle. If the fiber core is of poor quality the small bend angle can result in signal loss which leads to transmission interruptions. Brands such as Corning ClearCurve have a much better performance which reduces signal loss and makes routing and installation far easier.

112 (4)

2. Industry Recognized MTP Connectors

MTP connectors can house 12, 24, or 72 fibers in a ferrule. This makes them really grat for use in data centers due to the space they save. Industry recognized MTP or MPO connectors like those from US Conec, offers precision alignment which reduces insertion and return loss.

Industry recognised connectors provide a solid structure that make them great for many mating cycles. Buying the best MTP cables, and industry recognized MTP connectors matters greatly when quality and reliability are important.

112 (5)

3. Low Insertion Loss Is Very Important

Insertion Loss (IL) refers to the loss of optical power caused by using a connector or plug. It is one of the key factors that affects the performance of fiber optic networks. Simply put, the smaller the insertion loss, the better the network will perform. The IL of a conventional multi-mode MTP ferrule should generally not exceed 0.6 dB, and the conventional single-mode MTP ferrule should generally not exceed 0.75 dB. For single-mode and multi-mode MTP with low insertion loss (high quality), it is generally required that the insertion loss does not exceed 0.35 dB. When choosing MTP cables, try to choose vendors that provide insertion loss test reports with their cables. (Fibertronics does)

112 (2)

4. Consider How Flame Retardant It Is

Fiber optic cable jackets can be made up of various different materials, all of which have different fire resistances that are suitable for various scenarios. They most typically PVC, LSZH, Plenum and Riser. Most of these have good flame retardant properties. If there are higher requirements for the installation environment such as in drop ceiling and raised floors, it is best to choose a higher flame retardant level.

112 (3)

Post time: Nov-02-2021